Waterjet cutting
Waterjet cutting up to 230 mm
Cold cutting without heat input, for almost any material up to around 230 mm thick.
Location
The waterjet system is located at Lungmetall in Kottenheim near Mayen, between Koblenz, Neuwied and the Eifel. We cut on a contract basis to your drawing.
Key data
Equipment and capacities
Guide values as stated by the companies. We check feasibility for your specific part.
| Service | Capacity | Company |
|---|---|---|
| 4,000 bar waterjet system | Working area 4,000 × 2,200 mm, material up to around 230 mm | Lungmetall |
| Materials | Metals including titanium, plus stone, glass and plastic | Lungmetall |
Typical parts
Thick steel and stainless parts
Titanium and aluminium parts without structural change
Gaskets and plastic parts
Responsible
Lungmetall
Kottenheim
Products
What we make with it
Sheet metal and laser partsFAQ
Frequently asked questions
How thick can the material be?
At 4,000 bar we cut material up to around 230 mm thick. The working area is 4,000 × 2,200 mm.
Which materials can be cut?
Metals including titanium, plus stone, glass and plastic.
When is waterjet better than laser?
Waterjet cutting is a cold process. The material structure at the cut does not change, and very thick or heat-sensitive materials can be cut. For thinner sheets in series, laser is usually faster.
More capabilities
